Advantages Of Automatic Hot Stamping Machine

1. The automatic hot stamping machine uses a flat heating plate, and can be used with silica gel, flat hot stamping, and embossing. The equipment can also adjust the up and down stroke, running speed, hot stamping temperature, and the moving worktable structure of the equipment can make the hot stamping process safer. The use of anti-corrosion topcoat can be permanently stored without rust. The reasonable design of the equipment can be improved On the basis of hot stamping quality, the weight of the fuselage is greatly reduced.

2. The basic technology of hot stamping is under pressure, that is, when the anodized aluminum is pressed by the hot stamping plate and the substrate, the anodized aluminum is heated to melt the hot-melt silicone resin layer and the adhesive agent, and the hot melt at this moment The viscosity of the silicone resin becomes smaller, and the special heat-sensitive adhesive is added after being heated and melted, so that the aluminum layer and the anodized aluminum base film are peeled off and transferred to the substrate at the same time. The automatic hot stamping machine adopts dual hydraulic station heads as power, and its stability is good. Fully automatic operation, automatic shutdown and alarm if there is no card or failure.

3. Using PLC program control, only need to switch in the touch screen to complete a hot stamping work. The device is a high-speed intelligent coding machine that integrates large size, hot stamping, and card collection. The stepping distance of the hot stamping belt of the equipment is adjustable, which improves the utilization rate of hot stamping consumables.