Temperature Affects Bronzing

Temperature has a very important effect on hot stamping, and the temperature must be controlled within the corresponding range, so that the dyed resin layer and the adhesive can be melted appropriately to ensure the good transfer of the aluminum layer.

If the temperature is too high and the melting is too high, the anodized aluminum around the hot stamping graphic will also melt and fall off to produce a paste. At the same time, the high temperature will also cause chemical changes in the anodized aluminum dyeing resin and aluminum layer, reducing the brightness of the hot stamping product and losing its metallic luster. It can even make the mark appear foggy or blistering; but if the temperature is too low and the melting is insufficient, it will also cause the hot stamping or the hot stamping to be weak, the imprint will not be firm, easy to fall off, or the pen will be broken and the imprint will become blurred.