What Are The Characteristics Of The Automatic Hot Stamping Machine?
Sep 18, 2021
Hot stamping technology uses the principle of hot pressing to transfer the aluminum layer in the anodized aluminum to the surface of the substrate to form a special metal effect. Because the primary material used for hot stamping is anodized aluminum foil, hot stamping is also called anodized aluminum hot stamping. Anodized aluminum foil is generally composed of multiple layers of materials, and the base material is usually PE, followed by separation coating, color coating, metal coating (aluminum plating) and glue coating.
From the name point of view, there is a different level between "full-automatic" and "manual". The full-automatic hot stamping machine adds digital control operation to the manual hot stamping machine, thus getting rid of manual production. Mode, while increasing the production speed, it also reduces unnecessary waste caused by human factors in the production process. Significantly reduce production costs. Compared with manual hot stamping machine, the price of automatic hot stamping machine is quite expensive.
Fully automatic hot stamping machine is a new type of hydraulic hot stamping equipment designed and developed to meet the needs of the printing industry for hot stamping. It is also a hot stamping machine with automatic and hydraulic transmission, and the machine has high pressure, low noise, and automatic anodized aluminum. The conveying, up and down strokes can be adjusted arbitrarily. The equipment has good stability, large door width and simple operation, so it is suitable for various printing factories and individual bronzing households to process and hot stamp various delicate papers, desk calendars, wall calendars, invitations, shoe boxes, leather , Plastics, fabrics and other handicrafts. Because this machine is widely used, it is also a necessary equipment for printing, packaging, shoe leather and other industries.
The basic technology of bronzing is under pressure, that is, when the anodized aluminum is pressed by the hot stamping plate and the substrate, the anodized aluminum is heated to melt the hot-melt silicone resin layer and the adhesive agent, and the silicone that is melted by the heat at this moment The viscosity of the resin becomes smaller, and the special heat-sensitive adhesive is added after being heated and melted, so that the aluminum layer and the anodized aluminum base film are peeled off and transferred to the substrate at the same time. As the pressure is removed, the adhesive quickly cools and solidifies, and the aluminum layer is firmly attached to the substrate, completing a hot stamping process.
The feature of the automatic hot stamping machine is the use of a flat heating plate, combined with silica gel, flat hot stamping, and embossing. The equipment can also adjust the up and down stroke, running speed, hot stamping temperature, and the moving worktable structure of the equipment can make the hot stamping process safer. The use of anti-corrosion topcoat can be permanently stored without rust. The reasonable design of the equipment can be improved On the basis of hot stamping quality, the weight of the fuselage is greatly reduced. The hot stamping machine is also a special equipment for hot stamping various cardboard, leather, plastic and other products. It is mainly suitable for hot stamping anodized aluminum onto various papers, and can also be used for die-cutting and creasing various carton boxes, and various advanced Fine prints can be hot stamped on this machine, and you can get three-dimensional, exquisite and beautiful packaging and decoration products.