How To Use The Hot Stamping Machine?

1. The team leader of the bronzing machine is responsible for supervising the safety of the pilot of the bronzing machine.

2. Before the hot stamping machine works, the staff must tidy their work clothes and safety shoes, tighten their shirts and sleeves, and easily fall out of debris if they are not in their pockets. Do not wear watches, various accessories, clothes or pants. It is forbidden to put special tools, coins, signature pens, mobile phones, lighters and other objects in the bag. Padlocks, keys, BP machines and other objects are prohibited from falling into the machine.

3. Before starting the bronzing machine, add the required grease (lubricating grease) to the dripping points, lubrication points of the bronzing machine and the automobile fuel tank. 4. Without permission, the pilot of the plane other than the bronzing machine is not allowed to operate the bronzing machine privately, and the assistants and apprentices should work under the specific guidance of the bronzing machine chief in the actual operation of the bronzing machine.

4. Before the hot stamping machine is running, check whether there are sundries in all parts of the shell, and be sure to give the data signal first, echo back and forth, and clarify the safety of the hot stamping machine before turning on the hot stamping machine.

5. Before the hot stamping machine runs, ensure that irrelevant workers are close to the hot stamping machine

6. The hot stamping machine must check whether there is any dirt before loading and unloading, and ensure that the cutting screws are tightened. The posture of the push plate should be light to prevent damage to the bronzing machine. When the bronzing machine is in operation, it is forbidden to touch the work surface of fitness exercises with your hands, and it is forbidden to overhaul and scrub the machine.

7. The pilot of the airplane should strictly observe the position according to the division of responsibilities, and always pay attention to the operating conditions of each part of the bronzing machine, and shut down the machine immediately if the problem is found, and turn off the main power switch when shutting down for a long time.

8. The working environment should be kept clean, tidy and unobstructed, and the road surface should be free of debris around the operating table and bronzing machine. Repair tools and spare parts should be placed in the required places.

 9. Pay attention to the hot stamping machine: when the first (last) sheet is stamped, the machine will stop the alarm, and gradually increase (decrease) the working pressure manually, and it will operate again after increasing (decreasing) the working pressure. At the time of suspension, the actual operation staff shall ensure safety.

10. During work, everyone is prohibited from frolicking, playing, or making loud noises around the bronzing machine machinery and equipment.

11. When the work is finished, turn off the power of the bronzing machine to ensure that the waste paper around the bronzing machine is cleaned up and there is no debris in the machine.

12. The bronzing machine should be maintained and overhauled on time.